iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001).
I only realized today, that my iTunes gave this message whenever I connected to my iPhone 4.
"iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)."
Here’s a series of test which I have done to isolate what’s the main problem.
There are 2 USB ports on my MBA (name as USB#1 and USB#2).
When connect to USB#2:
The only thing left to do is to Restore the iPhone 4 or DFU and upgrade to the latest Firmware 4.3.3.
But... before I do this, can anyone here help me out? Any suggestion?
UPDATE:
Finally, I decided to try upgrade and Jailbreak iOS 4.3.3 using Pwnage 4.3.3.
However, the iTunes still failed to recognize the iPhone 4.
Continue Reading...
"iTunes could not connect to this iPhone because an unknown error occurred (0xE8000001)."
Here’s a series of test which I have done to isolate what’s the main problem.
There are 2 USB ports on my MBA (name as USB#1 and USB#2).
When connect to USB#2:
- iTunes gave error above.
- iPhoto is able to recognize the iPhone.
- DiskAid unable to recognize the iPhone.
- Delete and Reinstall iTunes - doesn’t work.
- Reset PRAM and run Disk Utility (Repair Permissions) - doesn’t work either.
- All other USB devices such as Sony Camera and iPad has no problem.
- iTunes recognize the iPhone! Can sync with no problem,
- iTunes also recognize both iPad (when both are connected)
The only thing left to do is to Restore the iPhone 4 or DFU and upgrade to the latest Firmware 4.3.3.
But... before I do this, can anyone here help me out? Any suggestion?
UPDATE:
Finally, I decided to try upgrade and Jailbreak iOS 4.3.3 using Pwnage 4.3.3.
However, the iTunes still failed to recognize the iPhone 4.
iPad 2 Jailbreak - Weeks or Months from Month of May?
Are you one of the iPad 2 owners who are yearning for a Jailbreak?
Guess what? Some might predict it gonna be weeks away, but Musclenerd just tweeted today that it can be months.
Too bad if you guys have to wait much longer. Even there are reports saying that the iPad 2 Jailbreak might becharge. What do you guys think?
Continue Reading...
Guess what? Some might predict it gonna be weeks away, but Musclenerd just tweeted today that it can be months.
Too bad if you guys have to wait much longer. Even there are reports saying that the iPad 2 Jailbreak might becharge. What do you guys think?
Unlock iPhone 4 with 1.59.00 or iPhone 3G & 3GS with 4.26.08, 5.11.07, 5.12.01, 5.13.04, and 6.15.00 Using Ultrasn0w 1.2.3
Ultrasn0w has been updated to version 1.2.3 with support for preserved baseband running iOS 4.3.3. In other words, ultrasn0w 1.2.3 does not unlock new baseband, but it does work to keep your unlock if you have been tugging along iPhone 4 with 1.59.00 or iPhone 3G & 3GS with 4.26.08, 5.11.07, 5.12.01, 5.13.04, and 6.15.00.
If this applies to you, you’ll want to use PwnageTool 4.3.3 (Mac) or Sn0wbreeze (Windows) to jailbreak while preserving your old baseband and updating to iOS 4.3.3.
Install Ultrasn0w Unlock for 4.3.3
After you are jailbroken, ultrasn0w is installed through Cydia. You can generally do this just by searching for “ultrasn0w” but if that fails:
Continue Reading...
If this applies to you, you’ll want to use PwnageTool 4.3.3 (Mac) or Sn0wbreeze (Windows) to jailbreak while preserving your old baseband and updating to iOS 4.3.3.
Install Ultrasn0w Unlock for 4.3.3
After you are jailbroken, ultrasn0w is installed through Cydia. You can generally do this just by searching for “ultrasn0w” but if that fails:
- Add http://repo666.ultrasn0w.com as a source repository to Cydia
- Search for “Ultrasn0w 1.2.3″ and install
- Reboot your iPhone
Where It Begins - My First Owned Website Using Exabyte
Finally I decided to take the plunge and register my own domain. I have been using the name “Edoras FotoZine” for many years in different websites such as the Fotopages, Blogger and Flickr.
Thus, before anyone else register that domain name, I decided to buy the domain and create my own photoblog, gadget blog and travel blog.
I registered the domain from one of Malaysia’s Hosting Services i.e. Exabytes on Jan. 31, 2011. Initially, I thought to use the domain name on the Blogger site but it seems that its quite a hassle to configure it there. Thus, I decided to subscribed to “Home Biz” package (hosting services)from Exabytes. At least my site is hosted locally (in response to the Government’s initiatives to host within Malaysian shores). Hopefully, the web response time from local users will be much faster than the international hosting services.
Since this is my first time, I found it is very difficult to understand all the Jargon of the website development but I managed to learn over the night. Configuring the services over the c-panel of Exabytes hosting server is not that difficult but to ensure that I install the right applications is quite a hassle for me.
At first, I tried some of Wordpress Template to create my Blog but it was not to my liking. Then, creating my own portal using Joomla proved to be a disaster. For someone who have no background experience of web designer, it is certainly not an easy task.
I have to call/email Exabytes support three times to solve my problem. Both times, I have not been able to access the server (due to firewall and too many ftp logins) and later I have difficulty in making http://www.edorasfotozine.com to open my self-created Frontpage /Homepage. It always decided to point back to the Exabytes welcoming page.
Finally, I chose to use iWeb for my Web Development. Initially I have problem in setting the FTP login and Directory settings, but finally I managed to pull it through and my first website is ready to have contents inserted.
Best Regards,
~Edoras~
Continue Reading...
Thus, before anyone else register that domain name, I decided to buy the domain and create my own photoblog, gadget blog and travel blog.
I registered the domain from one of Malaysia’s Hosting Services i.e. Exabytes on Jan. 31, 2011. Initially, I thought to use the domain name on the Blogger site but it seems that its quite a hassle to configure it there. Thus, I decided to subscribed to “Home Biz” package (hosting services)from Exabytes. At least my site is hosted locally (in response to the Government’s initiatives to host within Malaysian shores). Hopefully, the web response time from local users will be much faster than the international hosting services.
Since this is my first time, I found it is very difficult to understand all the Jargon of the website development but I managed to learn over the night. Configuring the services over the c-panel of Exabytes hosting server is not that difficult but to ensure that I install the right applications is quite a hassle for me.
At first, I tried some of Wordpress Template to create my Blog but it was not to my liking. Then, creating my own portal using Joomla proved to be a disaster. For someone who have no background experience of web designer, it is certainly not an easy task.
I have to call/email Exabytes support three times to solve my problem. Both times, I have not been able to access the server (due to firewall and too many ftp logins) and later I have difficulty in making http://www.edorasfotozine.com to open my self-created Frontpage /Homepage. It always decided to point back to the Exabytes welcoming page.
Finally, I chose to use iWeb for my Web Development. Initially I have problem in setting the FTP login and Directory settings, but finally I managed to pull it through and my first website is ready to have contents inserted.
Best Regards,
~Edoras~
3 Ways to Untethered Jaibreak iOS 4.3.3
There are three (3) methods to Jailbreak (untethered) iOS 4.3.3:-
Latest RC16 for Redsn0w has been released.
Also PwnageTool 4.3.3.1 can be downloaded here:
Continue Reading...
- [HOW-TO] - Untethered Jailbreak iOS 4.3.3 Using Pwnage 4.3.3 (preserving Baseband)
- [HOW-TO] - Untethered Jailbreak iOS 4.3.3 Using Redsn0w 0.9.6rc15
- [HOW-TO] - Untethered Jailbreak Using Sn0wbreeze 2.7
Latest RC16 for Redsn0w has been released.
Also PwnageTool 4.3.3.1 can be downloaded here:
- PwnageTool_4.3.3.1.dmg.6375459.TPB.torrent
- http://mayask.com/PwnageTool_4.3.3.1.dmg
- http://ibloo.net/PwnageTool_4.3.3.1.dmg
- http://m0o.eu/d/PwnageTool_4.3.3.1.dmg
- http://mirror.omegarazer.ca/PwnageTool/PwnageTool_4.3.3.1.dmg
- http://smotrikino.net/PwnageTool_4.3.3.1.dmg
- http://mirror.StrongRoute.com/PwnageTool_4.3.3.1.dmg
- http://www.idevice.ro/PwnageTool_4.3.3.1.dmg
- http://white-buy.ru/PwnageTool_4.3.3.1.dmg
[HOW-TO] - Untethered Jailbreak iOS 4.3.3 and Preserve Baseband using Pwnage Tool 4.3.3
Requirements:
- Pwnagetool 4.3.3 [Download Link]
- iTunes 10.2.2
- Stock iOS 4.3.3 iPSW file for you iPhone
- Mac Computer
Step 2: Browse for iOS 4.3.3 firmware which you have already downloaded for your device in above ‘requirements’,
Step 3: If You are on Official Carrier simply click “Build” Button and Pwnage tool will cook the custom firmware and save it on your PC.
Step 4: [Optional] If you are unofficial Carrier You must first press “General” Button before “Build” Button, And should select “Activate your Phone” which will which will preserve your old baseband and will make you able to unlock your iPhone on UltraSn0w.
After selecting options in “General” menu, click “Build” Button which will cook custom firmware for your device fully activated.
Step 5: Pwnage Tool will now create custom firmware for your device which will be Jailbroken and activated.
Put your iPhone into DFU mode. PwnageTool will help you in this process. Follow the onscreen instructions for this purpose.
- Hold Power and Home buttons for 10 seconds
- Now release the Power button but continue holding the Home button for 10 more seconds
- You device should now be in DFU mode
Step 7: Once In iTunes, hold the Alt/Option key and click Restore.
That’s it!! You are done with Jailbreak Process. Your device is now fully jailbroken on iOS 4.3.3 untethered.
How to Unlock iOS 4.3.3:
After Jailbreaking and preserving your baseband on iOS 4.3.3, If you are on unlockable baseband, you can follow our guide here to unlock your iPhone 4/iPhone 3GS with Ultasnow 1.2.3.
[SOURCE: Technobolt]
[HOW-TO] - Untethered Jailbreak iOS 4.3.3 Using Sn0wbreeze 2.7
[SOURCE: Spiritjb]
Sn0wbreeze 2.7 (aka PwnageTool for Windows) has just released to untethered jailbreak iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod touch 4G, 3G and iPad via a pre-jaibreak custom firmware.
Who rely on unlock should use Sn0wbreeze not Redsn0w , Why ? Sn0wbreeze 2.7 allows you to jailbreak untethered iOS 4.3.3 with preserving old (unlockable) baseband for iPhone 4, 3GS to unlock it with the current version of ultrasn0w.
Note: If you are looking forjailbreak iOS 4.3.3 untethered using Redsn0w, you can follow This Guide. If you looking for PwnageTool , follow this guide (PwnageTool 4.3.3)
Step 1: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 2: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 3: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 4: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.
Step 5: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 6: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze.
Step 7: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.3 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 8: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.3 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.3.
How to unlock iPhone 3GS, iPhone 4 on iOS 4.3.3:
You can follow this guide to unlock your iPhone 4, 3G running jailbroken iOS 4.3.3 using ultrasn0w
Download Sn0wbreeze 2.7 for Windows.
Download iOS 4.3.3 for iPhone, iPod touch, iPad
Download iTunes 10.2.2
Continue Reading...
Sn0wbreeze 2.7 (aka PwnageTool for Windows) has just released to untethered jailbreak iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod touch 4G, 3G and iPad via a pre-jaibreak custom firmware.
Who rely on unlock should use Sn0wbreeze not Redsn0w , Why ? Sn0wbreeze 2.7 allows you to jailbreak untethered iOS 4.3.3 with preserving old (unlockable) baseband for iPhone 4, 3GS to unlock it with the current version of ultrasn0w.
Note: If you are looking forjailbreak iOS 4.3.3 untethered using Redsn0w, you can follow This Guide. If you looking for PwnageTool , follow this guide (PwnageTool 4.3.3)
Step 1: Start Sn0wbreeze, click the next “blue” colored arrow to proceed.
Step 2: Select the required firmware .ipsw file for your iOS device by clicking on the “Browse” button.
Step 3: Sn0wbreeze will now identify the selected IPSW file. Once done, click the next “blue” colored arrow to proceed.
Step 4: Now select the “Expert Mode”, followed by “Build IPSW” option to start creating your custom firmware.
Step 5: Sn0wbreeze will greet you with the following “Done!” message when the custom firmware has been successfully created.
Step 6: Now follow the onscreen steps to enter DFU mode using Sn0wbreeze.
- Hold Power and Home buttons for 10 seconds
- Now release the Power button but continue holding the Home button for 10 more seconds
- You device should now be in DFU mode
Step 7: Start iTunes, click on your iOS device icon from the sidebar in iTunes. Now press and hold Left “Shift” button on the keyboard and then click on “Restore” (Not “Update” or “Check for Update”) button in iTunes and then release this button.
This will make iTunes prompt you to select the location for your custom firmware 4.3.3 file. Select the required custom .ipsw file that you created above, and click on “Open”.
Step 8: Now sit back and enjoy as iTunes does the rest for you. This will involve a series of automated steps. Be patient at this stage and don’t do anything silly. Just wait while iTunes installs the new firmware 4.3.3 on your iOS device. Your iOS device screen at this point will be showing a progress bar indicating installation progress. After the installation is done, your iOS device will be jailbroken on iOS 4.3.3.
How to unlock iPhone 3GS, iPhone 4 on iOS 4.3.3:
You can follow this guide to unlock your iPhone 4, 3G running jailbroken iOS 4.3.3 using ultrasn0w
Download Sn0wbreeze 2.7 for Windows.
Download iOS 4.3.3 for iPhone, iPod touch, iPad
Download iTunes 10.2.2
[HOW-TO] - Unlock iOS 4.3.3 (Baseband 01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00 ) using Ultrasn0w 1.2.3
[SOURCE: Ultras0w]
Along with Redsn0w 0.9.6RC15, the iPhone Dev Team has released a new version of Ultrasn0w 1.2.3 which unlocks iPhone 4, 3GS on iOS 4.3.3 for those who are already rely on unlock. Ultrasn0w 1.2.3 guide below. Ultrasn0w 1.2.3 supports 01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00 basebands.
STEP 1: First, you will have to jailbreak your iPhone 4 or 3GS on iOS 4.3.3. Instructions on how to jailbreak iOS 4.3.3 using Redsn0w 0.9.6RC15 can be found here.
STEP 2: Once you are done with the jailbreak, you can now unlock your iPhone on the supported basebands using Ultrasn0w 1.2.3 from Cydia. To do this:
- Start “Cydia” on your iPhone.
- Touch on “Manage” tab on the bottom.
- Now touch on “Sources” as seen in the screenshot below:
After installation is completed. Search for “ultrasn0w 1.2.3” in Cydia and install this application. This app will automatically unlock your iPhone so that you can use it with any carrier.
STEP 3: Now simply restart your iPhone and voila! you should now have a fully unlocked iPhone 4 or 3GS, running iOS 4.3.2 !
[HOW-TO] - Untethered Jailbreak iOS 4.3.3 Using redsn0w 0.9.6rc15 and PwnageTool 4.3.3
Apple released the latest iOS 4.3.3 with the following bug fixes:-
Dev Team just released Untethered Jailbreak using redsn0w 0.9.6rc15 and PwnageTool 4.3.3
redsn0w 0.9.6rc15:
Windows 7 users: If you’re having problems, be sure to run with CPU affinity = 1 (see the guides or comments for how to do this)
PwnageTool Official BitTorrent Release
SHA1 Sum = fc2721a6c1230aa676729b2e4aeeec3cd4ffed7a
Full step by step guide below:
STEP 1: Download iOS 4.3.3 from here, and iTunes 10.2.2 from here.
STEP 2: Start Redsn0w 0.9.6 RC15 and point it to the official iOS 4.3.3 you downloaded above.
STEP 3: Select Install Cydia and any other options you need then hit the Next button.
STEP 4: Make sure your device is turned off and plugged into your Computer.
STEP 5: Now follow the steps on the screen to enter the DFU mode not Recovery Mode.
STEP 6: Finally sit back and have a cup of coffee then wait for Redsn0w to jailbreak your iOS device followed by a quick reboot.
Download Redsn0w 0.9.6rc15 for Windows
Download Redsn0w 0.9.6rc15 for Mac
You can download the latest Redsn0wrc16 from --> HERE
Continue Reading...
| Bug Fix Release Current release for iPhone 3GS, iPhone 4, iPod Touch 3rd and 4th generations, iPad and iPad 2. This update contains changes to the iOS crowd-sourced location database cache .
|
redsn0w 0.9.6rc15:
Windows 7 users: If you’re having problems, be sure to run with CPU affinity = 1 (see the guides or comments for how to do this)
PwnageTool Official BitTorrent Release
SHA1 Sum = fc2721a6c1230aa676729b2e4aeeec3cd4ffed7a
Full step by step guide below:
STEP 1: Download iOS 4.3.3 from here, and iTunes 10.2.2 from here.
STEP 2: Start Redsn0w 0.9.6 RC15 and point it to the official iOS 4.3.3 you downloaded above.
STEP 3: Select Install Cydia and any other options you need then hit the Next button.
STEP 4: Make sure your device is turned off and plugged into your Computer.
STEP 5: Now follow the steps on the screen to enter the DFU mode not Recovery Mode.
STEP 6: Finally sit back and have a cup of coffee then wait for Redsn0w to jailbreak your iOS device followed by a quick reboot.
Download Redsn0w 0.9.6rc15 for Windows
Download Redsn0w 0.9.6rc15 for Mac
You can download the latest Redsn0wrc16 from --> HERE
iOS 5 will support Over-the-Air Firmware Update
It is expected that Apple will release future updates of iOS 5.0 via Over-the-Air for all their iOS devices. This is not new to other competitors.
Rather than full downloads, it make sense for Apple to update small sizes or patches.
Otherwise, the mobile network will certainly be congested with iOS updates traffic.
This is what has been reported to me recently by one of the local mobile telco - the traffic that congest their spectrum mainly came from Windows Updates!
What do you think? Will this be a great feature that you have been waiting for? What happen if your network is as fast as a “turtle”?
Continue Reading...
Rather than full downloads, it make sense for Apple to update small sizes or patches.
Otherwise, the mobile network will certainly be congested with iOS updates traffic.
This is what has been reported to me recently by one of the local mobile telco - the traffic that congest their spectrum mainly came from Windows Updates!
What do you think? Will this be a great feature that you have been waiting for? What happen if your network is as fast as a “turtle”?
The Rumored iPhone 5 Photos and Video!
These iPhone 5 photos are being designed by designers around the world.
Pick your choice!
I wished for the first photo below.
Continue Reading...
Pick your choice!
I wished for the first photo below.
iOS 5 Most Wanted Features
Here’s what you have been waiting for! iOS Most wanted features..
Apple might raise curtains off iOS 5.0 at its yearly developer conference WWDC 2011, and if sources are to be believed, Apple is going to bring the next cycle of iOS along with the iPhone 5.
Apple would be unveiling the iOS 5 around spring, alongside iPhone 5 in summer. The word is that there would be some heavy changes coming to MobileMe, showing more love for the cloud.
- Better Folders
- Wireless Syncing
- Android-style Lock Screen
- Revamped Notifications
- Music Sharing/Streaming
- Improved Multitasking
- New Auto Correct System
- Improved Airprint
- Beefed-Up Game Center
- Better Hotspot (More devices)
- Cloud Services (Free MobileMe)
- iPhone Mail mirrors the iPad
- Gesture support
- Android Style Lock
- Adobe Flash!
What’s your own wish list?
iPad 2 and iPhone 5 to be Jailbroken for Life
A recent Tweets from Veeence and p0sixninja revealed that Geohot might provide an exploit that can Pwned iPad 2 (A5) and iPhone 5 for life. Isn’t that awesome!
Continue Reading...
Subscribe to:
Posts (Atom)
