Showing posts with label untethered. Show all posts
Showing posts with label untethered. Show all posts

[HOW-TO] - Jailbreak iPhone 4S/ iPad 2 Using Absinthe For Windows (iOS 5.0/5.0.1)

  • Today, Chronic Dev Team releases Greenpois0n Absinthe v.1.2.2 for Windows users which jailbreaks both iPhone 4S and iPad 2
  • Here's a new easy guide showing how to jailbreak your A5 device using Absinthe:


Remember that this guide is for only Windows users:

STEP 1: Download Absinthe jailbreak v.1.2.2 [Windows users]

STEP 2: After done downloading open Absinthe jailbreak in Administrator mode then plugin your iPhone 4S/ iPad 2:
 STEP 3: Now allow the app to recognize your device and you will find 'Jailbreak" button appeared.

STEP 4: After the program is done running (and not a second before), go to your device’s home screen and locate the Absinthe icon. Click it. This executes the final stage of the jailbreak.

STEP 5: Now after the jailbreak is done, your device will restart and then you should see Cydia installed on your device :)



NOTE: If you are stuck at "Beginning jailbreak, this may take a while..", try to use the Fix in the previous post.
Continue Reading...

[HOW TO] - Jailbreak iPad 2 (or iPhone 4S) Using Absinthe [iOS 5.0.1 / iOS 5]

Step 1: Download Absinthe from this link and save the application in a folder named "Absinthe" on your desktop.
Step 2: Double click the Absinthe zip file and extract the application to the Absinthe folder. Navigate back to the Absinthe folder and launch the Absinthe application.
Step 3: After launching Absinthe, click on the Jailbreak button.
After clicking on the Jailbreak button the tool will give a progress update on the various stages of the jailbreak process such as:
"Beginning jailbreak" (note this can really take sometime - in our case this step took more than 10 minutes on our iPad 2, though it was lot quicker on iPhone 4S). NOTE: If you want faster way and don't want to wait that long, you can try this method, check ---> HERE)
"Sending initial data" at this time you will notice that "Restoring in Progress" message on your iPad 2 (this can also take a long time - in our case this step took more than 15 mins)
"Waiting for reboot"
"Waiting for device to finish rebooting" as your iPad 2 is rebooting.
"Preparing jailbreak data"
"Sending payload data" (this can also take a long time - in our case this step took more than 15 mins)
Step 4: In the end you'll be prompted with the message informing you that the jailbreak is "Almost done - just unlock the screen if necessary, then tap "Jailbreak" icon to finish.
Step 5: Unlock your iPad. The icon you should look for is the Absinthe icon and not "Jailbreak", it may not be on the first home screen page so you're better off just searching for it using Spotlight.
Step 6: Launch the Absinthe app. It should load the greenpois0n site and reboot your iPad 2. After it is rebooted, you should see the Cydia icon.
That's it, your iPad 2 is successfully jailbroken.
Troubleshooting tips:
Here are some troubleshooting tips if you hit an issue while jailbreaking your iPad 2 with Absinthe:
1. A number of readers have reported that they're getting "Error establishing a database connection"error message while loading the site or are seeing a white screen when they launch the Absinthe app. If you get that error message or white screen, the following trick seems to work:
  • Launch the Settings app
  • Then tap on General, followed by Network and then tap on VPN, here you will get "A configuration error occurred" message.
  • However after a minute, your iPad 2 will reboot and you should be able to see Cydia icon your iPad 2's home screen.
2. If it still doesn't help, just reboot your iPad 2 and start the process all over again. It may also be a good idea to disable your passcode when you try again as the tool gives a warning request that jailbreaking is most likely to fail if passcode is enabled (don't forget to enable it though after your iPad 2 is successfully jailbroken).
3. Ensure you've updated iTunes to the latest version (iTunes 10.5.3).
4. If you think it is taking a long time (or get the feeling that Absinthe isn't doing anything) then be patient. Check out the timings mentioned by us above for some of the steps.
5. If tips 1 and 2 don't help then iPhone Dev team has advised restoring your iPad 2 (which is not ideal). But our advise would be to try again after sometime as it could be very well due to the load on the servers.
If you're still having issues head over to IRC, pod2g and the Chronic Dev team are providing support on #greenpois0n on irc.chronic-dev.org. Please don't forget to drop us a line in the comments to tell us how your issue was fixed for your benefit of your fellow readers.
After the jailbreaking process is complete, do not forget to checkout our article on tips to keep your iPad secure.
If you're new to the jailbreaking world and wondering what to do after jailbreaking your iPad, checkout our jailbreak apps category page to find out the apps you can install on your iPad using the Cydia app. Please note that some of the jailbreak apps and tweaks are still not compatible with iOS 5/iOS 5.0.1 so please be cautious while installing them.
Updated 1:
Added the time it can take for the some of the time consuming stages and also some more troubleshooting tips.
Update 2:
Chronic Dev team has updated Absinthe to address load issue, so we've updated the download link with the latest version.
Hope this helped. Please don't forget to let us know how it goes in the comments and drop us a line if you hit any issues and don't forget to give a donation to the jailbreak dream team for all their hard work.

[SOURCE: iPhoneHacks]
Continue Reading...

Untethered Jailbreak - iPad 2, iPhone 4S - A5 Devices

  • Do you think this Sunday (Jan 22, 2012) would be a Funday for Untethered Jailbreak release for iPhone 4S running on iOS 5.0/5.0.1?
  • P0sixninja posted his latest tweet (see below):
Continue Reading...

[HOW-TO] - Untethered jailbreak of the latest 4.4.4 (iOS 5.0.1 - 9A406a) Apple TV2 using Seas0nPass

Seas0nPass supports a untethered jailbreak of the latest 4.4.4 (iOS 5.0.1 - 9A406a) AppleTV software. Full details on what's new in 4.4.4 can be found here.
Download Links
Seas0nPass for Mac [10.6 or later]
Seas0nPass for Windows [XP or later]
Video tutorial
Troubleshooting tips

Pre-launch checklist

  1. Latest version of iTunes.
  2. Latest version of Seas0nPass (use links above).
  3. A micro USB cable.
  4. Disconnect any iPods, iPhones, and iPads from your computer.

Using Seas0nPass to jailbreak the AppleTV

Step 1: Unzip the 'Seas0nPass.zip' file and launch Seas0nPass.
SP-launch.jpg
Step 2: Select the 'Create IPSW' button to start the jailbreak process.
SP-main2.jpg
Step 3: The latest AppleTV software will be downloaded and used to create a custom 'jailbroken' software file.
SP-create.jpg
Step 4: When prompted, connect your AppleTV to your Mac/PC using a micro-USB cable (leave power cable disconnected).
Once the light on the front of the AppleTV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.
Note: This step will require the silver (aluminum) AppleTV remote that was included with the ATV2. The older, white (plastic) remotes will not work.
SP-restore1.jpg
Step 5: iTunes will open automatically and start the restore process.
 SP-itunes.jpg
Step 6: iTunes will confirm the restore when complete - your AppleTV is now jailbroken!
Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in the lower right corner of the screen - as shown below.
sp-success.jpg

Using Seas0nPass for a 'tethered boot'

Some AppleTV software versions require a tethered boot. This means the AppleTV must be connected to a computer for a brief moment during startup.
Note: The tethered boot steps described below are not required when using the latest 4.4.4 AppleTV software.
Note 2: The AppleTV MUST be disconnected from the computer (for at least a brief moment) after restoring in iTunes for the tethered boot process below to work properly.
Step 1: Open Seas0nPass and select the 'Boot Tethered' option.
SP-main2.jpg
Step 2: When prompted, connect the AppleTV to your computer via USB. Wait for the rapid flashing light then connect the power. Once both are connected hold both the 'MENU' and 'PLAY/PAUSE' buttons for 7 seven seconds.
SP-tetherprompt.jpg
Step 3: Seas0nPass will complete the tethered boot automatically. Once complete, remove the USB cable and connect the HDMI cable.
Note: Timing is key. Once the you receive the success message shown below, the USB cable should be removed and HDMI cable connected before the light on the front of the AppleTV stops flashing. (Don't worry there is ample to do this, so you don't need Superman speed).
SP-tethercomplete.jpg
[Source: Seas0nPass]
Continue Reading...

[HOW-TO] - Jailbreak iOS 5.0.1 Untethered On iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G (A4 Devices) Using Redsn0w 0.9.10b1

Notes from Dev-Team:
Here are the basic steps for how to get it:
  • The untether is for iOS 5.0.1 on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G
  • If you have one of those devices and are not on 5.0.1 yet, update now! The SHSH window is still open for 5.0.1 If you unlock via ultrasn0w or gevey, make sure you only get to 5.0.1 via a custom IPSW! See the guides at places like iClarified.com if you don’t know how. Once you’re at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.
  • If you’re already at 5.0.1 with a tethered jailbreak, you have two choices: either run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia” if you do that), or install the Cydia package prepared by the chronic devteam. The patches are the same regardless of which you choose.
  • Some of you are using a hybrid 5.0/5.0.1 configuration. If so, do not attempt to install this untether over that setup! You will most likely get into a reboot cycle. Do a sync and fresh restore to 5.0.1 then install the jailbreak + untether.


For Users On Stock iOS 5.0.1:

If your device is running stock iOS 5.0.1 then you can use download the latest Redsn0w 0.9.10b1 to for either Windows or Mac to give yourself an untethered jailbreak, instructions for which can be found below.


Here are the redsn0w download links:
UPDATE (Dec. 30, 2011): 
Here are the redsn0w download links:


Step 1: Download the latest version of Redsn0w from the links given above.

Step 2: Start Redsn0w, select "Jailbreak" then check "Install Cydia". Follow the onscreen steps to place your device into DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

Step 3: Wait for Redsn0w to apply the full untethered jailbreak!

Once done, your iPhone, iPad or iPod touch will be rebooted into fully untethered jailbreak mode!

Check this youtube video.
Continue Reading...

[Update] - Saurik helped Pod2G regarding iPhone 4S Untether Jailbreak iOS 5.0/5.01 (Before or After Xmas?)

  • Pod2G was busy last Sunday to solve the untethered Jailbreak for iPhone 4S iOS 5.0/5.0.1 when he managed to get an iPhone 4S to test.
  • However, on Dec. 19, 2011, he reported in his pod2g's Blog that the untether fails.
  • But on Dec. 20, 2011, saurik, the iOS guru helped in solving one of the missing puzzle.
  • How soon will we be able to get the Untethered Jailbreak? Is it before or after Xmas? or before New Year?
  • See comments from pod2g's blog below.

Monday, December 19, 2011
New
 
Hello.
Here are the news of the 4S week-end.
The untether fails right now because I'm having processor cache issues.
I'm close, but I can't figure out what happens. It certainly has something to do with the Cortex-A9 cache management.
I could sort it out quick, it's a matter of chance.
I'll report you my progress tomorrow.
BTW: I removed (sorry) the greetings messages so that only articles related to the jailbreak remain in the main page. AFAIK Blogger don't have the option to move or fusion messages while keeping the comments.
Ciao!

Tuesday, December 20, 2011
No more cache troublesOK, figured it out, the A5 cache is not a problem anymore.
I sorted it out by doing the untether in a single thread and by flushing all the dcache then all the icache in a row at a strategical point of the process.
It took me like a hundred of tests to find the key. Hard for the nerves.
For the tech guys, here is a link explaining issues related to self modifying code ( or code patching ) on the ARM platform : http://blogs.arm.com/software-enablement/141-caches-and-self-modifying-code/
Another news : I discussed with @saurik today about the launchd boot process, and he's found one missing piece of the puzzle I needed to have a perfectly stable jailbreak. He's definitly one of the best iOS gurus out there. Thank you saurik!
Posted by pod2g at 2:02 AM 240 comments
Email This
BlogThis!
Share to Twitter
Share to Facebook
Continue Reading...

[Update] - iPhone 4S Untethered Jailbreak by Pod2G (Christmas 2011)

pod2g just announced that he has received iPhone 4S and will work hard on it this weekend.
It means the Untethered Jailbreak for iPhone 4S is just around the corner.
Will this be before Christmas?


Ypu can also check pod2g Blog for latest update from him.
Continue Reading...

Greenp0ison Jailbreak - Untethered Jailbreak for iOS 5.0/5.0.1 to be release on Nov. 27, 2011?

screenshot_02-2011-11-27-12-10.jpg


Something going on at greenp0ison.com tonight?
Check the website regularly!
Probably the new Untethered Jailbreak to be announce!
P0sixninja is the main member, with pod2g, in the Chronic Dev Team. P0sixninja and pod2g released Greenpois0n untethered jailbreak for iOS 4.2.1 last year and they’re willing to release something new this year too.
Continue Reading...

3 Ways to Untethered Jaibreak iOS 4.3.3

Continue Reading...

[HOW-TO] - Untethered Jailbreak iOS 4.3.3 and Preserve Baseband using Pwnage Tool 4.3.3

Requirements:
Step 1: Open Pwnage Tool in ‘Expert Mode’ and select your device and click blue arrow to continue.
pwnagetool-4.3.2-2011-05-8-09-30.png

Step 2: Browse for iOS 4.3.3 firmware which you have already downloaded for your device in above ‘requirements’,

pwnagetool-4.3.2-1-2011-05-8-09-30.png

Step 3: If You are on Official Carrier simply click “Build” Button and Pwnage tool will cook the custom firmware and save it on your PC.

pwnagetool-4.3.2-2-2011-05-8-09-30.png

Step 4: [Optional] If you are unofficial Carrier You must first press “General” Button before “Build” Button, And should select “Activate your Phone” which will which will preserve your old baseband and will make you able to unlock your iPhone on UltraSn0w.

pwnagetool-4.3.2-3-2011-05-8-09-30.png

pwnagetool-4.3.2-4-2011-05-8-09-30.png

After selecting options in “General” menu, click “Build” Button which will cook custom firmware for your device fully activated.

Step 5: Pwnage Tool will now create custom firmware for your device which will be Jailbroken and activated.

pwnagetool-4.3.2-5-2011-05-8-09-30.png

Put your iPhone into DFU mode. PwnageTool will help you in this process. Follow the onscreen instructions for this purpose.

  • Hold Power and Home buttons for 10 seconds
  • Now release the Power button but continue holding the Home button for 10 more seconds
  • You device should now be in DFU mode
Step 6: Once your iPhone is successfully in DFU mode, PwnageTool will prompt you to launch iTunes.
Step 7: Once In iTunes, hold the Alt/Option key and click Restore.

That’s it!! You are done with Jailbreak Process. Your device is now fully jailbroken on iOS 4.3.3 untethered.

How to Unlock iOS 4.3.3:

After Jailbreaking and preserving your baseband on iOS 4.3.3, If you are on unlockable baseband, you can follow our guide here to unlock your iPhone 4/iPhone 3GS with Ultasnow 1.2.3.

[SOURCE: Technobolt]
Continue Reading...

[HOW-TO] - Untethered Jailbreak iOS 4.3.3 Using redsn0w 0.9.6rc15 and PwnageTool 4.3.3

Apple released the latest iOS 4.3.3 with the following bug fixes:-

Bug Fix Release
Current release for iPhone 3GS, iPhone 4, iPod Touch 3rd and 4th generations, iPad and iPad 2. This update contains changes to the iOS crowd-sourced location database cache .
  • Reduced size of the iOS crowd-sourced location database cache
  • No longer backs that cache up to iTunes
  • Deletes that cache entirely when Location Services turned off
  • Battery Life Improvement
Dev Team just released Untethered Jailbreak using redsn0w 0.9.6rc15 and PwnageTool 4.3.3


screenshot_01-2011-05-6-20-22-2011-05-6-20-22-2011-05-6-20-22.jpg

redsn0w 0.9.6rc15:
Windows 7 users:  If you’re having problems, be sure to run with CPU affinity = 1 (see the guides or comments for how to do this)
PwnageTool Official BitTorrent Release

SHA1 Sum = fc2721a6c1230aa676729b2e4aeeec3cd4ffed7a
Full step by step guide below:
STEP 1: Download iOS 4.3.3 from here, and iTunes 10.2.2 from here.
STEP 2: Start Redsn0w 0.9.6 RC15 and point it to the official iOS 4.3.3 you downloaded above.
Redsn0w2-2011-05-6-20-22-2011-05-6-20-22-2011-05-6-20-22.png

STEP 3: Select Install Cydia and any other options you need then hit the Next button.
Redsn03-2011-05-6-20-22-2011-05-6-20-22-2011-05-6-20-22.png

STEP 4: Make sure your device is turned off and plugged into your Computer.
Redsn0w4-2011-05-6-20-22-2011-05-6-20-22-2011-05-6-20-22.png

STEP 5: Now follow the steps on the screen to enter the DFU mode not Recovery Mode.
1__%24%21%40%21__Redsn03-2011-05-6-20-22-2011-05-6-20-22-2011-05-6-20-22.png

STEP 6: Finally sit back and have a cup of coffee then wait for Redsn0w to jailbreak your iOS device followed by a quick reboot.

Download Redsn0w 0.9.6rc15 for Windows
Download Redsn0w 0.9.6rc15 for Mac

You can download the latest Redsn0wrc16 from --> HERE

Continue Reading...